Skip to main content

Fluid Flow

A pressure value is useful only when the sensor and the control system agree on what it means. For a replacement transducer or a new measurement point, start with the pressure reference, working range and required output. Then review the process connection, environment and installation around the sensor.

Solutions for your process

Define the pressure measurement

Pressure reference

Specify gauge, absolute, differential or vacuum measurement as appropriate. For a system that moves above and below atmospheric pressure, describe the full operating cycle when requesting a sensor.

Operating range

Provide typical pressure as well as minimum, maximum and transient conditions. Include cycling, pulsation or spikes reported during operation rather than using the normal gauge reading alone.

Signal and receiving device

Identify the PLC, display or controller input and its required signal. Confirm supply voltage, wiring, connector and scaling before treating another model as a direct replacement.

Convert process pressure into a usable measurement signal. Fluid Flow can help review pressure transducer requirements for your equipment, operating conditions and control system.

Transducers

  • Pressure reference and operating range
  • Compatible process materials and connections
  • Current or voltage output matched to the receiving device
  • Environmental and electrical requirements

Find the Right Pressure Measurement Fit

Share the sensor model, range and output, along with the application conditions and the issue you need to address.

Need to speak with someone now?

Call Us

(920) 729-1600

Plan the next step

Check the complete sensor configuration

Match the pressure reference, range and signal before comparing replacement sensors. Then check the fluid, temperatures, connections and electrical interface. A sensor that fits mechanically can still create a measurement or controller-scaling mismatch.

  • Complete manufacturer model and existing pressure range.
  • Fluid or gas, concentration and any cleaning conditions.
  • Process and ambient temperatures at the installation.
  • Thread or flange type, connector style and pin arrangement.
  • Output signal, supply voltage and controller scaling.
  • Required accuracy, documentation and environmental or location approvals.

Compare your options

Capture the pattern behind unstable readings

Record whether the variation appears only during startup, at a particular machine cycle, after washdown or continuously. Note whether the local reference and the controller disagree. That context gives your team a more focused starting point for checking the process, sensor and signal path.

For a new installation

Provide a sketch showing the pressure tap, nearby equipment and cable route. Identify the measurement decision: display, process control, trending or an alarm.

For a recurring failure

Include the age of the sensor, failure frequency and any recent change in fluid, cleaning, operating pressure or wiring. Repeated replacement deserves an application review.

Useful answers

Pressure-transducer questions

Names are sometimes used broadly. Match the actual output, power, range, reference, connections and required performance. A matching pressure range alone does not establish interchangeability.

Only when its specified measurement range and reference support that duty. Tell us the lowest pressure and whether the cycle also includes positive pressure.

Media compatibility, temperature, overpressure exposure, signal requirements, electrical connections, environmental conditions and the required measurement performance all matter.

Connect the measurement to the action

product

Instrumentation & Valves

Review where the pressure measurement fits in the complete control task.

product

Switches

Compare continuous measurement with a discrete trip or alarm requirement.

product

Remote Equipment Monitoring

Discuss how operating data needs to be viewed and used.

Fluid Flow application support

Review the sensor and signal path

Send the sensor details and describe the reading or control problem you need to solve.