Skip to main content

Fluid Flow

FLUID FLOW LOCATIONS

Compressed Air, Measurement & Process Equipment in Charlotte, NC

Fluid Flow’s Charlotte team supports compressed air in North Carolina and measurement, control and filtration across North Carolina and South Carolina. Connect equipment selection and service planning to the needs of your operation.

Products

Air Compressors & Treatment

Products

Instrumentation & Measurement

Products

Valves & Automation

Products

Filtration & Purification

One Local Partner for Your Process Equipment Needs

Whether you are replacing an instrument, improving filtration or automating a valve, begin with the process. Share the media, pressure, temperature and installation conditions so the equipment can be compared in context.

Our Carolinas team can support your operation with:

– Microfiltration and process filtration systems
– Ball, plug, butterfly, globe and specialty valves
– Pneumatic, electric and electro-hydraulic valve automation
– Point and continuous level measurement
– Flow, pressure, temperature, vacuum and mass flow instruments
– Control valves, regulators and vapor control equipment
– Process analyzers, calibration and flame detection
– Air compressors, air filters, dryers and nitrogen generators
– Equipment enclosures and wireless instrumentation
– Flow measurement devices, sight flow indicators and jet pumps

COMPRESSED AIR

Compressed Air & Vacuum Solutions in Charlotte, NC

A reliable air system depends on more than the compressor. The Charlotte team helps North Carolina facilities evaluate compressed air, blower and vacuum equipment around pressure, flow, air quality, operating conditions and production demand.

A pressure problem at one machine may call for a different review than a facility-wide demand peak. Describe where the issue appears, when it occurs and how the process is affected.

Kaishan rotary screw air compressor

Build the Right Compressed Air, Blower & Vacuum System

Compare normal demand and short peaks separately. Review pressure, flow, duty cycle and operating conditions before selecting supply equipment. Storage, piping and accessories also need to fit the system.

Solutions include:

  • Oil-free rotary screw compressors
  • Centrifugal air compressors
  • Centrifugal and regenerative blowers
  • Liquid ring, oil-sealed, and vane vacuum systems
  • Air knives
  • Air receivers
  • Piping
  • Heat exchangers
  • System accessories

Bring to the discussion: Normal and peak demand, required pressure and expected expansion.

Condition, Control & Monitor Your Compressed Air

Drying, filtration, measurement and control help protect the process after air is generated. Specify the required air quality at the point of use, then consider the inlet conditions and how the equipment will be monitored.

Solutions include:

  • Refrigerated and desiccant dryers
  • Specialty gas and liquid dryers
  • Water separators
  • Particulate and coalescing filters
  • Mist eliminators
  • Point-of-use and intake filtration
  • Condensate drains and separators
  • Compressed air controls
  • Flow controllers and meters
  • Remote monitoring
  • Hygrometers
  • Gas panels
  • Hydrogen control systems

Bring to the discussion: Air-quality requirements, inlet conditions and where moisture or contamination appears.

Keep Your Compressed Air Equipment Running

Support continues after equipment selection: preventative maintenance, emergency repairs, equipment overhauls, replacement parts, controls upgrades and system analysis for compressed air, dryer and vacuum equipment.

Audits, system design, remote monitoring, oil and vibration analysis, and dew point verification can help establish a measured starting point for the next decision.

Service capabilities include:

  • Preventative Maintenance
  • 24/7 Emergency Service
  • Compressor & Vacuum Repair
  • Dryer Service
  • Rentals
  • Compressed Air Audits & Optimization
  • Analytical Services
  • On-Site Training

Plan the work around operating hours, maintenance access, critical equipment and how production will continue during an outage.

MEASUREMENT, CONTROLS, AND FILTRATION

Measurement, Control & Filtration Solutions Across the Carolinas

From Charlotte, Fluid Flow supports measurement, control, valve automation, filtration and process equipment applications across North Carolina and South Carolina. Compare the media, operating range, required accuracy and installation conditions before choosing the technology.

Measure, Monitor & Understand Your Process

Use the information the process needs to guide instrument selection. Include the measurement range, required accuracy, signal, installation environment and how the reading will be used.

  • Level measurement and indication
  • Flow measurement and metering 
  • Pressure instrumentation
  • Temperature instrumentation
  • Vacuum measurement
  • Mass flow measurement and control
  • Process analyzers
  • Humidity measurement
  • Switches and transmitters
  • Calibration equipment
  • Panel and field meters
  • Wireless instrumentation
  • Signal conditioning and process monitoring

Bring to the discussion: Process media, range, accuracy, connection and output signal.

Control, Automate & Protect Your Process

Connect the valve, actuator or filtration selection to the process duty. Consider compatibility, operating pressure and temperature, the intended control action and downstream requirements.

  • Control and isolation valves
  • Ball, plug, butterfly and specialty valves
  • Pneumatic, electric and electro-hydraulic actuation
  • Positioners and limit switches
  • Pressure regulators
  • Vapor control systems
  • Microfiltration
  • Cartridge and bag filtration
  • Reverse osmosis and ultrafiltration systems
  • Liquid and gas coalescing
  • Oil purification
  • Solenoid valves
  • PID controllers
  • Process enclosures and shelters
  • Nitrogen generation
  • Supporting process equipment

 

asahi america type 14 diaphragm valve

Get the Right Technology for the Application

Selection support connects the specification to the duty. Discuss:

  • Technology selection
  • Equipment sizing and configuration
  • Instrument selection
  • Valve and actuator configuration
  • Filtration system selection
  • Replacement and cross-reference support
  • Application review
  • Manufacturer technical coordination

Solve Equipment & System Challenges With Local Expertise

Bring the operating problem and the project requirements together. The Charlotte team can help coordinate equipment choices, sizing, system improvements and the technical details needed to move the work forward.

  • Application and system review
  • Equipment selection and specification
  • Sizing and configuration support
  • Replacement and cross-reference assistance
  • System upgrades and optimization
  • Controls and monitoring evaluation
  • Manufacturer technical coordination
  • Ongoing equipment and application support

Your Local Fluid Flow Team in Charlotte

Connect with Fluid Flow in Charlotte, North Carolina, for compressed air, measurement and controls, filtration, and process equipment support. Share your facility location and application so the team can identify the appropriate specialist.

MAKE THE FIRST CONVERSATION USEFUL

Tell us about the whole application.

Equipment

Model, size and system connections.

Conditions

Media, flow, pressure and temperature.

Timing

Production impact and project schedule.

Symptoms

What changed and when it happens.

Facility

Site location and installation conditions.

CHARLOTTE / CAROLINAS QUESTIONS

What should I send with an equipment inquiry?

Include the model, process media, operating conditions, facility location and the result you need.

Can one inquiry cover compressed air and process equipment?

Describe the connected systems and how the issue affects production so the relevant resources can be identified.

Where can I review the local equipment offering?

Use the Charlotte air and Carolinas process line cards. Discuss specific product availability and application requirements with the team.

Where is the Fluid Flow Charlotte branch located?

The Charlotte branch is at 3915 Shopton Rd., Suite 101, Charlotte, NC 28217. Call (704) 847-4464 to discuss compressed air, measurement, controls or filtration support.

PART OF FLOW CONTROL GROUP

Connected through a technical solutions and services network.

Need Equipment or System Support in Charlotte?

Tell our Charlotte team what your facility needs—compressed air, measurement and controls, filtration, or process equipment. Share the operating challenge, location and timing so we can help identify the next step.