Skip to main content

Fluid Flow

INDUSTRIES / OIL AND GAS

Oil & Gas
Process Equipment

Evaluate gas treatment, instrument air, filtration, pumping and measurement around your process stream and site requirements.

Match the equipment to the stream and the site

A gas-treatment application, a liquid-transfer duty and an instrument-air system each need their own specification. Production facilities, oilfield service operations and refineries also have different operating and installation constraints. Identify the process stage and the equipment’s role so the technical review starts in the right place.

EXPLORE EQUIPMENT

Equipment for your operation.

Pall filtration system with transparent background

PALL | PARKER

Gas filtration and separation

Evaluate particulate filtration and liquid-gas separation around the contamination load and downstream equipment requirement.

ELGI | HANWHA | SPX FLOW

Instrument air systems

Review compressors, drying and related equipment as part of a defined site air specification.

Ashcroft industrial pressure gauge

ASHCROFT | MAGNETROL | AMETEK ORION INSTRUMENTS

Pressure and level instruments

Discuss process measurement with the range, wetted materials, mounting arrangement and required outputs.

Flowserve centrifugal pump with transparent background

CASHCO | FLOWSERVE | SAMSON

Valves and process pumping

Match control, isolation or transfer duty to the process conditions and project specification.

Manufacturer availability and service scope vary by product line and territory. Product images illustrate examples; confirm the appropriate configuration for your application.

Explore our manufacturers.

APPLICATION SUPPORT

Address the part of the process that needs attention.

Liquid carryover in a gas stream

Describe the gas composition, pressure, temperature and suspected liquid or particulate contamination. Coalescing can address fine liquid droplets, but equipment selection depends on the stream and required downstream protection.

Instrument air in demanding conditions

Define pressure, demand and moisture requirements at the instruments. Include ambient exposure and the expected low-load, startup and peak-demand conditions when reviewing drying, storage and supply.

Pressure or level measurement in difficult service

Share the process media, connection, temperature and installation environment. Material compatibility, fouling potential and any required area classification belong in the instrument and valve review.

Prepare for maintenance windows and operating changes

Share the equipment list, operating issue and required timing with your regional Fluid Flow team. Discuss the available compressed air service, parts, startup support and rental options for the site. Defined connections and utility requirements make the service or temporary-equipment discussion more useful.

PLANNING RESOURCES

Useful next steps for your equipment review.

Explore service options, manufacturer availability and regional support before finalizing your specification.

Confirm current specifications and availability with your regional team.

Before you specify equipment

What is the difference between a particulate filter and a coalescer?

A particulate filter captures solid contamination. A liquid-gas coalescer collects fine liquid droplets into larger droplets that can drain from the gas stream. Some applications need both functions, selected around the operating conditions.

Is every product suitable for a hazardous location?

No. Suitability depends on the specific product configuration and the site’s classification and documentation requirements. Provide those requirements before product selection; a general industrial listing is not enough.

Can the same equipment be used across production and refinery applications?

Do not assume so. Compare media composition, pressure, temperature, contamination, duty and site specifications. Similar equipment names can describe products intended for very different service conditions.

Tell us where the operating issue occurs

Share the process stream, equipment details and site location. We will help you identify the relevant product and technical support options.