An alarm that trips too often can become background noise. A switch that responds at the wrong condition can leave an operator with too little warning. Define the action your system needs, the point at which it should occur and the condition for returning to normal before choosing a pressure, temperature or level switch.
Solutions for your process
Define the event that needs a response
Pressure and differential pressure
Identify rising or falling pressure, the required trip point and the reset condition. Include normal cycling and maximum pressure so the selected device matches more than a single setpoint.
Temperature
State the process temperature that requires action and where it will be sensed. Include the operating range, installation arrangement, ambient conditions and the response your process requires.
Level
Describe the vessel, liquid and mounting position. Explain whether the job is a high-level alarm, low-level indication or pump-control action, and provide the intended switching elevations.
Choose industrial switches around the condition that needs action. Fluid Flow can help review pressure, temperature and level switching requirements for your process.
Pressure Switches
- Metal & Elastomer Diaphragm
- Differential Pressure Switches
- Dia-seal & Piston Switches
- Compact Pressure Switches
- Low cost & OEM style pressure switches
- Transducer & Solid State Pressure Switches
Temperature Switches
- Mechanical & Electronic Temperature Sensors
- Switches with and without LED display
Level Switches
- Mechanical & Electronic Level switches and indicators
- Single & Multi level switches
- Bypass level indicators
- Electronic level probes
- Tank Gauge
- Ultrasonic Level switches
Discuss Your Switching Requirement
Send your trip and reset requirements, process details and existing switch model so we can review the application with you.
Need to speak with someone now?
Call Us
(920) 729-1600
Application insight
Specify both trip and reset points
For a pressure switch, deadband is the difference between the trip and reset pressures. A replacement with a different deadband can change how the process cycles even when the nominal setpoint is the same. Specify both points, the direction of approach and whether the application calls for automatic or manual reset.
Plan the next step
Build the switching requirement
- Measured variable, normal range and the condition requiring action.
- Increasing or decreasing trip point and the desired reset behavior.
- Fluid, wetted materials and process temperature.
- Electrical load, contact arrangement, supply and receiving circuit.
- Mounting, connections, environmental conditions and applicable equipment requirements.
- Existing manufacturer, complete model and photos for replacement requests.
Application insight
Connect each alarm to a response
Document what the alarm means, who receives it and the response it should trigger. Include nuisance trips, the production state and any switches that respond together. For protective duties, review the complete control function, its requirements and its test approach.
Useful answers
Switch selection questions
Deadband is the difference between the pressure that trips the switch and the pressure that resets it. It should be considered with the setpoint and operating cycle.
A switch provides a change of state at a condition. If your controller needs a continuous measurement or trend, include a transmitter or another suitable measurement device in the specification.
Share the setpoint, reset behavior, process trend if available, electrical load and timing of the event. Note recent changes to the equipment or operating sequence.
Compare switching with other control needs
product
Instrumentation & Valves
Review the complete measurement and control requirement.
product
Transducers
Consider when a continuous pressure signal is needed alongside switching.
product
Anchor Scientific
Compare float-switch electrical duties and liquid-level sequences.
Fluid Flow application support
Discuss your switching application
Describe the trip condition, the control action and the problem with the current arrangement.