Skip to main content

Fluid Flow

/

/ Panametrics Ultrasonic Flow Meters

Instrumentation & Valves

Panametrics Ultrasonic Flow Meters

Panametrics ultrasonic flow meters support gas and liquid measurement across process and utility systems. Fluid Flow can help compare permanent and portable installations, identify pipe and fluid constraints, and define the data your team needs.

Panametrics logo

Explore Panametrics products

Start with the fluid, installation method and measurement purpose.

Permanent liquid flow measurement

Monitor an operating line with clamp-on or inline ultrasonic measurement. Clamp-on sensors mount outside the pipe; an inline system uses an engineered flow section.

Portable flow measurement

Take temporary measurements for a survey, troubleshooting task or verification project. Portable liquid and gas instruments are distinct selections.

Gas and flare flow measurement

Track gas flow where changes in operating conditions make measurement selection important. Flare applications require a review of the complete gas stream and operating envelope.

Start with your operating requirements.

Document the pipe

Measure outside diameter and wall thickness, and identify material, coating and liner. These inputs are especially important for clamp-on ultrasonic systems.

Characterize the fluid

Describe gas composition or liquid properties, operating pressure and temperature, and the presence of bubbles, solids or condensation.

Define the measurement purpose

Clarify whether the task is a temporary diagnostic check, permanent process monitoring or flare measurement. Specify the required outputs and recording interval.

Product resources

Process flow meters

Permanent inline and clamp-on ultrasonic options.

Portable flow meters

Portable gas and liquid measurement.

Flare measurement

Flare gas measurement products and resources.

Frequently asked questions

Clamp-on transducers mount to the exterior of a suitable pipe. Suitability still depends on pipe construction, fluid conditions, access and the selected instrument; every installation should be reviewed.

Do not assume that it can. Panametrics offers different portable liquid and gas instruments. Match the instrument, transducers and setup to the fluid and pipe.

The measurement depends on sound traveling through a known path. Pipe size, wall thickness, material and lining affect the setup, so complete pipe information is needed before selection and commissioning.

Contact your local Fluid Flow team to confirm product availability and options for your facility.

Find the right solution for your application.

Share your operating requirements, current equipment and facility location.