Pall product solutions
Filter changes alone may not resolve contamination, short element life or off-spec process fluid. Review Pall filtration and separation technologies with Fluid Flow using the contaminant, operating conditions and required outlet quality to identify the appropriate treatment duty.
Define the separation requirement before choosing a filter rating.
Review the medium, retention requirement and housing configuration for liquid-process filtration. Compare compatibility and pressure loss with the operating flow.
Evaluate membrane treatment when the process requires a defined separation beyond a simple replacement cartridge. Pall’s Microza UF module family is one example for applicable water-treatment duties.
Droplets and particulate loading require separate attention.
Separate a dispersed liquid phase from the continuous process liquid using an appropriate coalescing arrangement. Review solids pretreatment and the fluid chemistry.
Review removal of liquid droplets and solids from a gas stream to protect downstream process equipment. Include carryover and upset conditions.
Identify particulate, a dispersed liquid, vapor or dissolved material. Define the required outlet quality and how it is measured.
Include current element and housing numbers, clean and operating differential pressure, changeout frequency and production volume between changes.
Provide fluid composition, temperature, pressure, flow and any cleaning conditions. For coalescing, identify both phases and known emulsifiers or surfactants.
Manufacturer industrial filtration and separation overview.
Not necessarily. The rating must match the contaminant and required retention. A tighter element may add pressure loss or reduce service life while leaving another separation problem unresolved.
Particulate filtration captures solids. Coalescing combines small droplets of a dispersed liquid so that liquid can separate from the main stream. A process may need both stages.
This page covers filtration, separation and purification. Pump selection is a related system task, but no standalone Pall pump range is represented here.
Contact your local Fluid Flow team to confirm product availability and options for your facility.
Share your operating requirements, current equipment and facility location.