Skip to main content

Fluid Flow

/

/ Kahn Dew Point & Moisture Instruments

DEW POINT & MOISTURE MEASUREMENT

Kahn Dew Point & Moisture Instruments

Need to identify an installed Kahn hygrometer or plan its replacement? Kahn's published references cover portable and fixed moisture instruments, ceramic sensors and chilled-mirror measurement. The manufacturer identifies hygrometers as a former product line and directs product-line inquiries to Rotronic. Use the references below to frame an accurate application review.

Kahn Instruments logo

Identify the installed measurement approach

These are legacy product references, useful for understanding an existing installation and defining replacement requirements.

Ceramic-sensor transmitters

Identify fixed dew-point transmitters and the signal requirements of an existing monitoring point.

Portable hygrometers

Review instruments used for spot checks and troubleshooting at multiple sampling points.

Chilled-mirror optical hygrometers

Understand an existing optical dew-point measurement or reference application.

Start with your operating requirements.

Define the measurement point

State the gas, pressure, temperature and expected dew-point range. Record whether the sample is measured at line pressure or after pressure reduction.

Preserve the system interface

For replacement planning, document the output signal, power supply, display, alarm and control-system connections of the existing instrument.

Describe the sampling arrangement

Include sample tubing, conditioning, flow and the response time the process needs. Contamination and sampling can affect the result as much as the sensor.

Product resources

Kahn hygrometer reference and product-line notice

Official legacy instrument overview and current inquiry direction.

Ceramic-sensor reference

Legacy transmitter and portable-instrument information.

Optical hygrometer reference

Published chilled-mirror instrument information.

Frequently asked questions

Kahn’s official hygrometer page identifies this as a former product line and directs inquiries to Rotronic Instrument Corporation. Confirm the current support or replacement route for the exact model.

Provide model and serial details, a nameplate photo, sensor and display information, output signal and the gas being measured. Include the sample pressure and expected dew point.

Dew point depends on pressure. Record whether the result is measured at operating pressure or on a reduced-pressure sample so measurements and specifications can be compared correctly.

Contact your local Fluid Flow team to confirm product availability and options for your facility.

Find the right solution for your application.

Share your operating requirements, current equipment and facility location.