Skip to main content

Fluid Flow

/

/ Autrol Pressure & Temperature Transmitters

Instrumentation & Valves

Autrol Pressure & Temperature Transmitters

Autrol smart transmitters provide pressure, differential-pressure and temperature signals for process monitoring and control. Fluid Flow can help define the measuring range, process connection and communication requirements before selecting a transmitter.

Autrol logo

Explore Autrol products

Choose the measured variable and reference before narrowing the transmitter configuration.

Gauge and absolute-pressure transmitters

Measure process pressure against the correct reference. Gauge and absolute pressure are distinct measurements and should be specified explicitly.

Differential-pressure transmitters

Measure the pressure difference between two process points. Appropriate installations can use differential pressure for flow or vessel-level measurement.

Temperature transmitters

Convert a compatible temperature-sensor signal into a process measurement output. Selection depends on the sensor, range and installation arrangement.

Start with your operating requirements.

Specify the measurement reference

State gauge, absolute or differential pressure. For differential-pressure applications, include the pressure present on both sides during normal and abnormal conditions.

Describe the process connection

Supply connection type, material requirements and any isolation or remote-seal arrangement. For temperature, provide the sensor and mounting details.

Match the plant signal

Autrol smart transmitters include analog and HART communication configurations. Confirm the selected model, power supply and receiving system before specifying the output.

Product resources

Autrol pressure transmitters

Pressure families and product documents.

APT 3100 information

Differential-pressure transmitter details.

Autrol temperature transmitters

Temperature measurement families.

Frequently asked questions

It can be used in an engineered level installation. Selection depends on fluid density, vessel pressure, mounting elevation and impulse-line or seal arrangement. Provide those details along with the level span.

Gauge pressure is referenced to atmospheric pressure. Absolute pressure is referenced to vacuum. The process requirement determines which reference the transmitter must use.

Send its nameplate, calibrated range, process connections, wetted materials, signal type and application details. For a differential-pressure installation, include the manifold or seal arrangement.

Contact your local Fluid Flow team to confirm product availability and options for your facility.

Find the right solution for your application.

Share your operating requirements, current equipment and facility location.