Skip to main content

Fluid Flow

/

/ Aircel Compressed Air Dryers

COMPRESSED AIR & GAS

Aircel Compressed Air Dryers

Moisture problems can affect tools, instruments and production equipment long before a dryer stops running. Aircel's refrigerated and desiccant dryer families address different drying duties. Now part of nano-purification solutions, Aircel product information includes both current and legacy equipment references to support a precise model review.

Aircel logo
Aircel refrigerated air dryer

Refrigerated dryer families

Review actual inlet conditions and the required downstream dryness before selecting a refrigerated dryer.

VF non-cycling refrigerated dryers

Refrigerated drying for suitable industrial compressed-air duties.

DHT high-inlet-temperature dryers

Review drying arrangements where incoming compressed air is hotter than a standard dryer design anticipates.

Desiccant drying approaches

Desiccant dryer selection should include regeneration method and the cost of compressed air used for purge.

HL heatless twin-tower dryers

Desiccant drying for applications with lower pressure-dew-point requirements.

EH externally heated dryers

A heated regeneration approach for desiccant air-drying duties.

ABP blower-purge dryers

Review blower-assisted regeneration as part of a larger desiccant dryer evaluation.

Start with your operating requirements.

Specify pressure dew point

Describe the dryness required by the process and the coldest downstream piping. Refrigerated and desiccant dryers address different moisture targets.

Use actual inlet conditions

Provide flow, pressure, inlet temperature and ambient temperature. Nominal dryer capacity needs to be reviewed against the actual installation.

Include regeneration and condensate

Consider purge air, electrical requirements, filtration and drains. These affect both performance and operating cost.

Product resources

Official Aircel equipment directory

nano's Aircel product-family and support links.

Aircel VF dryer reference

Manufacturer reference for non-cycling refrigerated equipment.

Frequently asked questions

Yes. nano-purification solutions identifies Aircel as an acquired brand and provides Aircel equipment and technical references. Confirm the exact current or legacy model before specifying a replacement.

Possible causes include changed inlet conditions, excessive flow, drain or filtration issues, and a drying target that does not suit the downstream temperature. Review the conditions before assuming a larger dryer is needed.

Send the model, serial number and nameplate photo together with operating pressure, flow, inlet temperature and the observed moisture problem.

Contact your local Fluid Flow team to confirm product availability and options for your facility.

Find the right solution for your application.

Share your operating requirements, current equipment and facility location.