Instrumentation & Valves
Conax Technologies provides thermocouples, RTDs and compression seal fittings for industrial temperature measurement and sealed penetrations. Fluid Flow can help define the sensor assembly, insertion geometry and sealing requirements as one installation.
Specify the sensing element, assembly geometry and process seal together.
Measure temperature with an assembly selected for the process range and physical installation. Sensor construction, termination and mounting all affect the fit.
Use resistance-temperature sensing for compatible process measurement. Match the element and wiring to the transmitter or receiving instrument.
Seal a probe, tube or other element through a pressure or vacuum boundary using a suitable fitting and sealant. Single- and multiple-element arrangements address different installations.
Provide normal and maximum temperature, required sensor type, process medium and the signal accepted by the receiving instrument.
Include insertion length, sheath diameter and material, connection, mounting and termination. A sketch or existing drawing helps prevent fit problems.
For seal fittings, specify the element being sealed, media, pressure or vacuum, temperature and sealant requirements. Verify the complete combination rather than a fitting size alone.
Turbine thermocouple design and exhaust-gas temperature measurement information.
They produce different electrical signals. The receiving instrument, wiring, measurement range and installation must match the selected sensor type; do not assume a direct substitution.
Provide the element material, diameter and quantity, process connection, media, pressure or vacuum and temperature. Include any need to adjust the insertion depth or seal multiple elements.
It affects the measurement location and how the sensor fits the process connection or thermowell. Provide the complete mounting dimensions and required sensing position when selecting or replacing an assembly.
Contact your local Fluid Flow team to confirm product availability and options for your facility.
Share your operating requirements, current equipment and facility location.