Skip to main content

Fluid Flow

/

/ Teledyne Hastings Gas Flow & Vacuum Instruments

Instrumentation & Valves

Teledyne Hastings Gas Flow & Vacuum Instruments

Teledyne Hastings Instruments provides gas mass-flow meters, mass-flow controllers and vacuum instrumentation. Fluid Flow can help match the instrument to the gas, required flow or vacuum range, and the way the measurement will be used.

Teledyne Hastings Instruments logo
Teledyne Hastings Instruments instrumentation

Explore Teledyne Hastings Instruments products

Distinguish gas measurement, active gas control and vacuum pressure monitoring.

Gas mass-flow meters

Measure gas flow for process monitoring, testing and laboratory work. Thermal mass-flow instruments are configured around the gas and measurement range.

Mass-flow controllers

Maintain a gas-flow setpoint using measurement and a control valve in one instrument. Valve operation depends on the pressure conditions across the controller.

Vacuum and pressure instruments

Monitor absolute pressure in a vacuum system. Gauge technologies and measuring ranges must suit the process gas and expected vacuum conditions.

Start with your operating requirements.

Define the gas and units

Specify gas composition, flow units and their reference temperature and pressure. Standard-volume units cannot be interpreted consistently without those reference conditions.

Provide pressure conditions

For a controller, include upstream and downstream pressure at normal and limiting conditions. For vacuum measurement, provide the full absolute-pressure range.

Describe process exposure

Identify corrosive gases, moisture, deposits, ambient temperature and electrical requirements. These affect materials, sensor choice and integration.

Product resources

Thermal mass-flow instruments

Selection inputs and gas-flow applications.

Mass-flow terminology

Meter, controller and reference-condition definitions.

Vacuum measurement resources

Manufacturer guidance on vacuum gauge applications.

Frequently asked questions

A meter measures gas flow. A controller adds a valve and control loop to maintain the requested setpoint. Selecting a controller also requires the pressure available across its valve.

Units such as sccm or slm express an amount of gas using a defined temperature and pressure. Different reference conditions give different standardized volume values for the same gas mass.

The complete range, gas composition and process exposure matter. Share startup pressure, normal operating pressure and the lowest required reading so the sensing method can be reviewed.

Contact your local Fluid Flow team to confirm product availability and options for your facility.

Find the right solution for your application.

Share your operating requirements, current equipment and facility location.