Skip to main content

Fluid Flow

/

/ Hankison Air Dryers & Filters

Compressed-air treatment

Hankison Air Dryers & Filters

Wet compressed air, filter pressure loss and changing production demand call for a treatment review built around the application. Explore Hankison refrigerated and desiccant dryers, compressed-air filters and condensate-management options with Fluid Flow.

SPX Air filter

Compressed-air dryers

Define the required pressure dew point and actual inlet conditions before comparing dryer technologies.

Refrigerated air dryers

Review refrigerated drying where its delivered dew point meets the process and installation requirements. Compare cycling and non-cycling designs against the operating schedule.

Heatless desiccant dryers

Evaluate heatless regenerative designs when the process requires drier air than refrigerated drying can provide. Account for regeneration air in the system demand.

Heated & blower-purge desiccant dryers

Compare HPD heated-purge and HBP blower-purge families when evaluating regeneration arrangements for the application.

Filters & condensate management

Pair drying with the filter and drainage duties that protect the process.

SPX Air filter

NGF & HF compressed-air filters

Review filter grade, operating flow and contaminant removal together. Include clean and operating differential pressure when replacing existing equipment.

Condensate-management options

Include collection and drainage in the treatment arrangement so separated liquid is removed from the system.

Start with your operating requirements.

State the air-quality requirement

Provide the required pressure dew point and particle or oil requirements at each critical point of use. Include the lowest ambient temperature along the distribution route.

Use actual inlet conditions

Share normal and peak flow, minimum operating pressure, inlet temperature and ambient conditions. Nominal compressor capacity alone is not a complete dryer specification.

Review regeneration and drainage

Account for purge demand or electrical utilities, filter pressure loss and condensate handling. Include service access and how production will be supported during maintenance.

Product resources

Hankison dryer families

Manufacturer refrigerated, desiccant and membrane drying options.

Desiccant air dryers

Manufacturer heatless, heated-purge and blower-purge families.

Compressed-air filters

Manufacturer filter families and selection factors.

Technical support & resources

Manufacturer service and technical-document guidance.

Frequently asked questions

Consider it when the required pressure dew point is below what a refrigerated dryer can deliver, including applications with low-temperature exposure. Confirm the selected configuration against the operating conditions.

Drying controls moisture vapor. Filtration addresses specified particles or liquid aerosols, and drains remove separated liquid. The treatment stages must work together to meet the process requirement.

Horsepower is not enough. Review actual flow, pressure, inlet temperature, ambient conditions and the required dew point, then apply the manufacturer’s selection guidance.

Contact your local Fluid Flow team to confirm product availability and options for your facility.

Find the right solution for your application.

Share your operating requirements, current equipment and facility location.