Vaisala product solutions
Use moisture measurements to investigate wet air, verify dryer performance and understand changing process conditions. Fluid Flow can help review Vaisala dew point, humidity and temperature instruments around the actual measurement location, pressure, environment and required signal.
Choose the measurement approach around the air-quality decision it must support.
Monitor moisture continuously in compressed air, industrial gases and drying processes using a probe suited to the conditions.
Use portable dew-point measurement for checks and troubleshooting at different locations. Select the probe and sampling arrangement for the application.
Review the DMT132 where dew-point measurement is needed to assess refrigerant-dryer operation. Confirm the instrument against the actual installation conditions.
Connect the measured variable with the process condition you need to control.
Compare humidity, moisture and temperature measurement approaches for the process environment. Define whether the requirement is relative humidity, dew point or another moisture quantity.
State whether the requirement is pressure dew point, relative humidity or another moisture measure. Include the expected range and the decision the reading supports.
Provide system pressure, sample pressure, tubing, flow arrangement and measurement location. Differences in sampling conditions can change how readings should be compared.
Specify PLC or display inputs, power supply, installation access and maintenance approach. For troubleshooting, include dryer alarms and a record of when moisture appears.
No. They describe moisture differently. Relative humidity depends on air temperature; dew point describes the temperature at which condensation begins for the stated conditions. Select the quantity that matches the process requirement.
Compare them only with compatible sampling conditions and adequate stabilization. Record pressure and measurement location so a difference is not mistaken for an instrument fault.
No. Dew-point measurement addresses moisture. Other contaminants need their own assessment when the process-air specification includes them.
Contact your local Fluid Flow team to confirm product availability and options for your facility.
Share your operating requirements, current equipment and facility location.