Parker product solutions
Protect process quality and make fluid connections fit the measurement task. Fluid Flow can help review Parker liquid and gas filtration, compressed-air treatment, instrumentation valves, manifolds, tubing and fittings around contamination, compatibility and operating conditions.
Identify what must be removed and where the required quality must be achieved.
Review cartridge, housing and separation requirements for an industrial liquid or gas stream. Start with contaminant type and the required outlet quality.
Compare compressed-air filter stages with the particles, liquid aerosols and downstream equipment involved. Include drains and pressure loss in the system review.
Review the fluid path between the process and the measurement or control device.
Arrange isolation and instrument connections around the measurement task and the required service access.
Match fittings with the specified tube material, dimensions and installation requirements. A connection that threads together is not sufficient evidence of compatibility.
For filtration, describe the contaminant and target outlet quality. For instrumentation, define what must be isolated, regulated, sampled or measured.
Provide fluid composition, flow, pressure and temperature, including startup or cleaning conditions. Include the current part number and available drawings.
Account for filter drains, seals and housings, or for tubing, fittings and connected instruments. Evaluate the weakest-rated component in the actual assembly.
A coalescing filter addresses entrained liquid droplets. Drying is a separate duty when the process needs a specified moisture-vapor level or pressure dew point.
No. First establish whether the contaminant is particulate, liquid or vapor. A finer particulate grade can increase pressure loss without addressing the underlying contaminant.
Send the complete part number, photos, a connection drawing and the tube specification. Include fluid, pressure and temperature so the connection and material requirements can be reviewed together.
Contact your local Fluid Flow team to confirm product availability and options for your facility.
Share your operating requirements, current equipment and facility location.