FLUID FLOW PRODUCTS | PARATHERM
The right thermal fluid must support both normal operation and the conditions at startup. Paratherm offers mineral-oil and synthetic heat-transfer fluids, products for heating and cooling, and cleaners for thermal systems. Fluid Flow helps organize the temperature, heater and maintenance information needed to compare the available options.
Compare fluid chemistry with heater design, operating temperature and the demands of the process.
A highly refined mineral-oil heat-transfer fluid for thermal-system applications.
A mineral-oil heat-transfer fluid with high naphthenic content and low viscosity.
An alkylated-aromatic synthetic fluid for closed-loop, liquid-phase heating.
A heat-transfer fluid formulated to resist oxidation and sludge formation in thermal-oil service.
Include the lowest startup and cooling temperatures when comparing fluids.
A mid-range fluid for systems that use one heat-transfer fluid for heating and cooling.
An aliphatic-hydrocarbon fluid for lower-temperature thermal applications.
Address deposits and fluid condition with the appropriate cleaner and manufacturer guidance.
A cleaner formulated for sludge and carbon deposits in hot-oil temperature-control units.
A cleaner for deposits in larger, continuously operated thermal systems.
Provide normal bulk temperature, expected startup temperature, heating and cooling duty, and the type of heater. Compare the actual conditions with the current fluid data.
State whether incidental-food-contact registration is required. HE, NF, LR and MR are listed in the manufacturer portfolio as NSF HT1-registered; confirm the selected grade and documentation.
Identify the installed fluid, operating age, recent analysis, maintenance history and any deposit or flow issues. Review compatibility before mixing or replacing fluids.
Explore the manufacturer’s fluid-analysis and thermal-system support.
Review the product engineering bulletin and safety-data resources.
No. The range includes different base-fluid chemistries and operating purposes, including high-temperature heating, heating and cooling, and lower-temperature service. Selection should follow the current technical data for the specific grade.
The manufacturer lists HE, NF, LR and MR with NSF HT1 registration for incidental food contact. The required grade still depends on the system temperatures and heater conditions.
If the system has deposit, sludge or flow concerns, provide the fluid history and analysis information for review. Paratherm offers separate cleaners for temperature-control units and larger thermal systems; the cleaning method should be selected for the actual condition.
Contact your local Fluid Flow team to confirm product availability and options for your facility.
Share your operating requirements, current equipment and facility location.