Skip to main content

Fluid Flow

  • Home
  • HVAC and Paint Process

Review HVAC and paint process filtration around particle capture, filter fit and the airflow requirements of the installed equipment. Evaluate gas and vapor treatment separately when the process requires it.

HVAC and paint process filtration share a need for controlled airflow, but their filtration duties differ. General ventilation addresses airborne particles entering or circulating through a facility. Paint applications also require attention to incoming-air cleanliness and overspray capture. Describe the equipment, contaminant and operating concern when discussing options with Fluid Flow.

Application insight

Give every filtration stage a clear job

Identify each filter bank’s job: protect an air-handling unit, keep particles away from a finish or capture paint overspray. That purpose determines which performance, fit and pressure-loss questions belong in the selection.

HVAC particle filtration

Compare particle-capture performance, dimensions and resistance at the intended airflow. An efficiency designation such as MERV describes a tested particle-filtration characteristic; it does not by itself establish the correct fit or operating pressure drop for an air-handling unit.

Paint booth intake and exhaust

Incoming-air filtration helps manage particles reaching the finish, while exhaust filtration captures overspray. Loading at either stage can change airflow and booth pressure. Evaluate filter choices within the booth manufacturer’s specified ventilation arrangement.

Gases, odors and VOCs

Particulate overspray filters should not be described as general VOC-removal devices. Molecular or gas-phase media address selected gases and vapors through a different mechanism. Identify the compound and concentration when gas removal is part of the requirement.

Comprehensive Filtration Solutions for HVAC & Paint Process Applications

  • Bulk Polyester Media Rolls
  • Disposable Synthetic and Polyester Panels
  • Ring and Link Panels
  • Permanent Metal Filters
  • Air Intake Screens
  • Pleats and Mini-Pleat Filters
  • Extended Surface Pocket Filters
  • Rigid Cells
  • HEPA & ULPA Filters
  • Gas Phase (Activated Carbon) Filtration
  • Ultraviolet Technology
  • Auto-Rolls
  • Ceiling Diffusion Media
  • Paint Overspray Filters
  • Robot Covers
  • Automotive Wipes
  • Service Belts
  • Ambient Air Purifiers

Compare your options

Connect airflow changes with finish quality

When a process develops dust defects, rapid filter loading or an airflow change, record which symptoms appeared first. Filter condition is useful evidence, but the inquiry should also describe production changes and the installed ventilation system.

  • Record pressure-drop readings across individual stages, available airflow measurements and the timing of recent filter changes.
  • Document filter seating, seals and visible gaps using the equipment’s inspection procedure.
  • For paint operations, identify coating type, application method, operating hours and any change in production rate.
  • Include booth or air-handler model information, the filter-bank arrangement and the manufacturer’s operating limits.

Plan the next step

Match replacements to the installation

A useful replacement inquiry includes more than nominal dimensions. Send the actual installed size, filter depth, frame and gasket details, part number and quantity in each stage. Explain whether you need an equivalent replacement or are reviewing a specific performance problem.

  • State the required filtration classification and any customer or process documentation requirements.
  • Provide available fan or system information before considering a change in filter resistance.
  • Share the current changeout criterion, typical service interval and access constraints affecting maintenance.

Useful answers

Airflow and filter selection questions

Do not assume it will. Overspray capture addresses particles and droplets. Vapor treatment requires a separate review of the compounds, concentrations and suitable gas-phase technology.

The selection must meet the application requirement within the installed system’s airflow and pressure limits. Compare the proposed filter’s performance data with the air-handler requirements before changing the specification.

Follow the booth manufacturer’s maintenance criteria for each stage and verify the resulting airflow conditions. Uneven loading between intake and exhaust stages can affect booth pressure, so consider the complete arrangement when planning changes.

Review related air-filtration applications

product

Filtration & Purification

Review contaminant removal and media selection in the wider process.

product

Dust and Mist Collection

Compare collection requirements for dust, fume and machining mist.

industry

General Industry

Put filtration into the context of the production application.

Fluid Flow application support

Discuss your air-filtration requirements

Send Fluid Flow the air-handler or booth details, installed filter information and the problem you need to address. Include your facility location to establish the relevant product availability and support.