Skip to main content

Fluid Flow

  • Home
  • High Purity Water

Review high purity water filtration, membrane treatment and pretreatment around your feedwater conditions and the quality required by your process.

High purity water starts with a defined requirement at the point of use. A rinse process, boiler system and production ingredient stream may need different treatment steps. Bring Fluid Flow your feedwater analysis, required water quality and production demand to discuss filtration, membrane replacement and pretreatment options for your application.

Application insight

Define what the water must meet

Start with the required water-quality specification and a recent feedwater analysis. Clear appearance does not establish suitability for a process: suspended matter and dissolved constituents need different treatment steps. Evaluate the membrane as part of the complete treatment arrangement.

Suspended contamination

Microfiltration and ultrafiltration address suspended contamination. They can serve as pretreatment for downstream membranes, but they do not provide the dissolved-salt removal associated with reverse osmosis.

Dissolved salts

Reverse osmosis separates dissolved salts through a membrane. Resulting water quality depends on the membrane, feed composition and operating conditions. Specify the required outlet quality rather than assuming that every RO system produces the same water.

Membrane protection

Pretreatment should address the actual feedwater risks. Solids loading, scale-forming constituents and membrane chemical compatibility deserve separate consideration. A cartridge prefilter alone does not resolve every fouling or scaling mechanism.

Comprehensive Filtration Solutions for High Purity Water Process Applications

  • Complete Reverse Osmosis Systems (custom and standard)
  • Membrane Filters and Pre-filtration Elements
  • Ultrafiltration (UF) & Microfiltration (MF)
  • Antiscalant / Cleaning Chemicals
  • Clean-in-Place (CIP) Skids
  • Activated Carbon and Media Filtration

Compare your options

Investigate falling membrane output

Record what changed before ordering replacement membranes. Feedwater temperature, pressure, chemistry and system operation can affect production. Compare current operation with commissioning records and the membrane manufacturer’s guidance; a single low-flow reading does not establish the cause.

  • Record feed, permeate and concentrate flows together with pressures, temperature and conductivity readings.
  • Include the timing of the problem: gradual deterioration, a source-water change, restart after shutdown or a recent cleaning.
  • Share pretreatment layout, prefilter change history, membrane model numbers and the cleaning procedure already used.

Plan the next step

Specify water quality and demand

For a new system, explain the process demand as well as the daily volume. Peak draw, operating hours, available storage and acceptable interruption all help define the project. For an existing installation, photographs of nameplates and a simple process diagram help establish what is already installed.

  • Provide a recent feedwater analysis and the required outlet specification, including how and where quality will be measured.
  • Identify available utilities, installation space, concentrate-handling arrangements and access for routine maintenance.
  • List documentation requirements and any existing qualification or cleaning constraints before comparing replacement options.

Useful answers

Water-treatment questions

Only if its separation capability meets the process requirement. UF addresses suspended material; it should not be selected to meet a dissolved-salt or conductivity target that requires a different treatment step.

First compare operating conditions and performance trends with the manufacturer’s guidance. Changes in feed temperature, pressure or chemistry can affect output. Provide those records with your replacement inquiry.

Send the complete model number, system details, feedwater analysis and required permeate quality. Physical dimensions alone do not establish equivalent performance or compatibility with cleaning chemicals.

Review the complete water-treatment process

product

Filtration & Purification

Compare treatment mechanisms against the actual contaminants.

product

Liquid Process

Review upstream liquid filtration and element selection.

product

Instrumentation & Valves

Define the measurements and control actions needed to operate the system.

Fluid Flow application support

Discuss your water quality requirement

Share your water analysis, system information and production target with Fluid Flow. Include your facility location so the inquiry can be matched with applicable product availability and support.